110-326 Gas Water Heater Control Valve, Natural Gas Water Heater Thermostat Built-In Non-Circulating Energy Cut-Off (ECO) System Water Heater Replacement Parts with 1-3/8" Shank

Part Number: 110-326 Water Heater Valve Specification : 110-326 Gas water heater valve pressure regulation 3-1/2" W.C Outlet size 1/2" Inlet size 1/2"Thermostat shank length1-3/8" Sensing tube 5-1/2" Pipe flow setting 45,000 temperature 160F (71C) built-in non-circulating energy cut-off (ECO) system Note: 110-326 The natural gas valve for a water heater is typically utilized for domestic water tank replacement needs. It is not recommended for use in RVs.Package IncludingPart Number: 110-326 Water Heater Valve

• Product Overview: 110-326 Gas Water Heater Control Valve, Designed For Tank-Type Natural Gas Water Heaters. Provides Mechanical Temperature Control And Gas Flow Regulation For Systems Using Pilot And Thermocouple Ignition. Suitable For Replacement Applications Matching Listed Pressure, Port Sizes, And Temperature Specifications.
• Safety Control With Built-In ECO: All 110-326 Models Feature A Built-In Non-Circulating Energy Cut-Off (ECO) System. The ECO Automatically Shuts Off The Gas Supply When Water Temperature Exceeds 160°F (71°C) To Help Prevent Overheating And Protect The Water Heater System. ECO Activation Permanently Stops Gas Flow And Requires Valve Replacement.
• Detailed Technical Parameters: Maximum Inlet Pressure Up To 50 mbar, With Adjustable Outlet Pressure Range Of 3–18 mbar And Factory Setting At 2.2" W.C. Thermostat Temperature Control Range 30°C–75°C (86°F–167°F). Built-In ECO Shuts Off Gas Supply At 160°F (71°C). Ambient Operating Temperature 0°C–85°C, Rated Gas Flow Capacity Up To 45,000 BTU. For Natural Gas Applications Only, Not Intended For RV Or Mobile Equipment Use. All Parameters Must Match Appliance Requirements.
• Material And Build Quality: Constructed With High-Quality Metal Components And A Precision-Machined Valve Body. Equipped With A Copper Temperature Probe Sensor For Accurate Heat Sensing And Stable Mechanical Operation. Designed For Long-Term Use In Residential Gas Water Heater Systems.
• Port Sizes And Installation Notes: Features A 1/2" Pipe Thread Gas Inlet (Ø 0.84" / 21 mm) And A 1/2" Inverted Flare Gas Outlet (Ø 0.79" / 20 mm), Along With An 11/32"-32 UNS Pilot Outlet (Ø 0.44" / 11 mm). The Thermostat Shank Uses A 3/4" NPT Connection (Ø 1.05" / 26 mm) With A 3.8 Inch Shank Length. Please Verify All Port Sizes And Thread Types Before Installation To Ensure Proper Fit And Safe Operation